Easy Installation
Step 1:
Remove the old seed tube from the row unit. Cut the zip ties that are holding the sensor to the tube.
Step 2:
Position the sensor onto the BullsEye Seed Tube in the same position and direction that it was on the old tube. Use the zip ties provided with the new seed tube to secure the sensor to the seed tube.
Step 3:
Make sure that the area around the pin that the seed tube hooks over is clean of dirt and debris. Install the BullsEye Seed Tube back into the row unit making sure that the hook is hooked over the pin. Secure the tube with the same pin and clip that held the old tube in place.
A fast and easy upgrade that has a dramatic yield impact.
Comments are closed